status code 209L
Brake Coil Open

again check the afore mentioned
fuses
wiring
connections

also
- Check the resistance of the brake coil. The coil resistance should read approximately 32 ohms.
- Recycle key switch.
- Check for voltage at the brake coil. Should read approximately 36 volts. If no voltage, check wiring for loose connections at the dash display connector pin #A12 & pin #A13. Also check pin #C28 & pin #C29 at the traction controller. Check for open cir-
cuits in the wiring harness.
- Check brake circuit diodes.
- Check brake circuit diodes D2 and D3 for an open or shorted condition.

good luck