So replaced the two Gate Transistors, now the Code 26 is gone and now getting 2A (Overheating) which they are not as they are VERY cold, I can clear the code and exit then I get a 44 shut down. Checked all of the tests so far and can not seem to find anything. Could this still be related to the Transistors? I did have the Negative lug come out of the PCB on the drive transistors. I soldered it back and it show connection but wondering if the Negative connection may not be a good one at this point causing the problems.

As I said I could drive it backwards and all other functions worked before this.