We have a faulty directional switch in the 580060625 display module on this Veracitor truck.

We removed the display module from the truck completely and removed all of the T15 Torx fasteners from it and triple checked to ensure all were removed. We broke the glue seal in the display case halves and cannot seem to get the center part (where the column goes through) to come apart.

Does anyone have any insight on how to separate the display module halves or do we not have to split the module open?

I can visually see two holes on each side of the directional switch (you would think there would be two fasteners) but we cannot locate any fastener in there to remove it.

Please give any insight to this - as other trucks in our fleet have the same setup and the switch itself is very loose and is bound to break soon and our local Briggs dealer stocks many of these switches!

THANKS!