Key turn on - Traction trouble on display
rb contact closes
49 volts to fwd/rev contacts - all fuses good ( including T fuse )
move control lever to fwd/rev - fwd/rev contact click on
press accel pedal - motor attempts to turn then contacts kick off

I have 49 volts to K1 term on T plug Diode and 30 Volts at A1

Removed both diodes -tested ok - swapped and re installed with new thermo compound

same voltages - run diagnostic and stops at T fuse??

Any thoughts or questions
contact me through email

prenticelift at gmail dot com