7777,
I basically agree with your comments most of the time they will work but on occassions you will get a spinner- it all depends on how the wheel OD was formed to the lowside or high side of the manufacturing tolerance & the same with the tire steel band. A fat band & a wheel to the skinny side will greatly increase the chance of a spinner & general that doesn't show up until you have paid for a pressing charge & the check has cleared the bank. Also temperature can have an effect, cold temps will slightly shrink (OD get smaller & ID's larger metal. Like cold soaking metal object that was put togetehr with an interfernce fit in ice or dry ice to make it come apart (like bearings on a shaft. It is a matter of risk.