It will run fine then shut off restart the motor rev it up it cuts out spudders but will idle ok. I changed the accelerator position sensor and the throddle chamber. I do have the book and calibrated them by turning the key off and on like it said. When I changed the throddle chamber today started right up warmed it up shut it off let it cool then it started just fine. Did that a couple times then it starded doing the same thig again won't rev up. If I turn the key on 2 seconds turn off 10 seconds then start it it will rev up?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.