Hi,

Email address is [email address removed]

The forklift will drive around without any faults, until i try to use the hydralics such as the lift tilt or side movement. Can hear the motor starting and then in a few seconds the fault comes on and the motor stops. The forklift itself can still drive forward, reverse and steer but the error 084 comes up and the lift tilt and side movement is disabled.

This only happened after doing a full recharge on the forklift. Not sure if it could be overcharged and this could create this problem. I have checked the hydralic fluid and it seems to be ok.

Thanks Hvala.