when you power on the system, while watching the status lights on the controllers, are they blinking in a certain pattern?
the error code will be displayed as a flashing pattern from the LED light on the controller in question if an error is detected during startup of the system.
it should be a group of flashes, then a short pause followed by another group of flashes. The pattern should repeat.
So basically if the light flashes 2 times, pauses for a couple seconds and then flashes 3 times the error code would be 23.
So what code is it flashing?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.