DTC 523249-4 - Lever 4 Position OORL
POSSIBLE CAUSE
A. MINI LEVER FAILURE (GENERATION 1)
B. MINI LEVER MODULE (MLM) FAILURE
C. FUNCTIONAL FAILURE IN CONTROLLER
DTC 2236-12 - CANbus Comm Error With MLM
POSSIBLE CAUSE
A. TERMINATION RESISTOR(S) OPEN CIRCUIT
B. OPEN/INTERMITTENT CIRCUIT ON CAN HI, CAN LO
C. CAN HI AND CAN LO SHORTED TOGETHER
D. OPEN CIRCUIT ON POWER/GROUND TO CAN CONNECTED DEVICES
E. STG ON CAN HI
F. STS/STB ON CAN LO
G. CAN CONNECTED DEVICE FAILURE
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.