Hi,

I had a short in the lift motor, it caused the Q1 and REC1 to burn out.

I replaced them both, still had code 23.

I replaced the power card and the system card as well, and still have code 23.

I replaced/checked VFC with known working as well, still code 23.


I have gone through almost everything except TM (transistor module) and STILL CODE 23!!!


Any advice on what I should look at next, because this code 23 is killing me.


Lift/auxillary functions run, but the traction/drive functions do not and truck is immobilized by code 23.


Thanks in advance,