I ASK EVERYONE TO PLEASE RESPOND TO THIS POST so that I can forward it to the people that need to hear it, and that can hopefully help promote a much needed change.

As I am sure we are all aware of the situation regarding the material handling industry and each manufacturer having their own software and passwords, and if you are not aware of it you will be affected by it sooner rather than later probably. (Read below for a little more information regarding it, if you are unfamiliar).

I am in the process of puting this together so that I can bring it to MHEDA (Material Handling Equipment Distributors Association) and other associations I feel could help resolve this issue, to see if we can get a much needed change in our industry. Some may agree with this and some may not but the truth of the matter is that we all continue to hurt ourselves and probably the customer the most by the way we are doing things.

Currently, most, if not all manufacturers' have set up their own software programs, cables, handsets, cords, pass codes etc. to work on their machines, now some of them work on another make or model occasionally but for the most part they are specific to that manufacturer's machine. The problem with this way of doing things is that it is making it increasingly difficult for a customer to choose who they would like to work on their equipment. With most of the dealers in my area refusing to sell the handsets, software, give pass codes etc. I understand the need for making money and I understand the benefits of not giving that software/information to your competition/customer that may do their own repairs. But my bottom line is this: The customer should have the choice of who they want to have service/repair their equipment and should not feel like they are not given a choice of who they can use by only being able to use the dealer no matter what they charge, or what customer service experience they offer etc. I have personally spoken with several customers that do not want the dealer of their make/model of equipment on their property at all (even going as far as paying other people to do non software needed work on their machine when it is under warranty even though they could have gotten their machine fixed for free). Then there are others customers that have stated to me that right now they are struggling badly and cannot afford to have the dealer of their machine do the work because they are the most expensive in the state but cannot find anyone else that has the software etc. so they feel they have no choice. Even others that cannot afford the 3 or 4 day (or sometimes longer) wait time to have the dealer of their specific machines come to repair them.

There are a lot of ways/backdoors to get the software, cables, handsets, passwords etc. that you need but it isn't always possible and it wastes time and causes un-needed frustration. I've spoken with several dealers that are torn on this because in some of their locations it benefits them because they have the majority share of the market and in other locations it hurts them.

I am not saying there are not a lot of factors involved in the way things have been done so far: liability, legality etc. But there has to be a way that we can change this for the better (like the automobile industry has) I think the main difference between us and the automobile industry is that there are not 5 material handling dealers for the same machines (ex: Hyster, Toyota etc) within the same territory or just down the street from each other. There is typically only one Material Handling dealer per make per state/territory and if a company's corporate sends a certain make of machine or if you just like the quality of a certain machine better than the others and you do not like the dealer for that machine in your territory you should not feel that you have no choice but to use them.

Bottom line the automobile industry tried to keep the software and password proprietary in the beginning and it worked until people like all of us (small businesses, independents, customers, etc) stood up and said 'enough'. And now I am saying: 'enough.' Will this affect my business in a negative way... yes it will, will it affect my business in a positive way... yes it will, but the bottom line is the customer should have the ability to choose who is right for the repair of their machines. I shouldn't, as a dealer, get to choose and neither should any other dealer or manufacturer.

My entire goal for this, is for it to be a main topic that we can all get together about and find a better solution for all of us and for the customers.

Print and send this (or refer them to this posting) to as many people as you know (customers, mechanics, independents, dealers, etc.) so that everyone is aware and able to hopefully help make a change in our industry.

I appreciate your time and look forward to your responses, There is alot of people effected by this and if we come together we can make a change.