1. Home
  2. Forums
  3. Report post

Report this forum post

Hi i had a unit overheat because the belt broke off and the operator used it until it started blowing out antifreeze i replaced the belt but ever since then the unit stalls out i check the L.P. gas made sure i have 1.5 to 2.0 psi coming out of the regulator the ignition checks out ok I believe i need to reset the ecu any ideas on how to do it on this truck it does have a GM 3.0
  • Posted 11 Sep 2009 13:50
  • By marc_a
  • joined 19 Feb'09 - 31 messages
  • Baja California, Mexico

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Your Focus
Stuart Taylor
Reduce the risk by tackling the cause
Stuart Taylor
Read blog
From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
From the forum discussions …
"Congrats to Afshin who was the second person to use the new photo system on the Forums. Click on the photos to see them enlarged. Afshin writes: "I have a error code 06-03 in Toyota 8FG30...""
Afshin, Iran, Islamic Republic Of
Read & Post in our Forums
Forklift Diaries
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ
Upcoming industry events …
Electric & Hybrid Vehicle Technology Expo 2025
October 6-9, 2025 - Detroit, MI, United States
The Battery Show North America
October 6-9, 2025 - Detroit, MI, United States
ASCL Awards 2025
November 14, 2025 - Melbourne, Australia
More Events
Global Industry News
edition #1237 - 3 July 2025
While innovation and new technology are evolving at what seems to be an ever-increasing pace, the need to capture the data (telemetry) from this tech, and the ability to utilise it (telematics) for efficiency and cost savings, is one area attracting more and more attention ... Continue reading
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".