OK, heres one for you
i have a 2004 mitsubishi fgc25n with a nissan k21 engine.
It starts hard after it sits and throws a code 27.
I checked the coil pacs, replaced the crank angle sensor, and sparkplugs, cleaned the maf sensor..the truck still cranks alot before starting. once its running it runs great, but on occasion will start to lope and sputter at idle. if you turn off the truck and immediately start it back up it will start good, but wait more than about 10 seconds and it will crank about 10 times before starting and throw a code 27....