New to me Linde H25T-03 H2X351M05526 / 2001 with higher cabin, heater, SVAB PAMM-2000 CAN hydraulics control. It has 4 hydraulic functions on the SVAB controller already but I need more levers and hydraulic outputs. Not going to mess with the SVAB controller but instead add something else. I guess first question is does the valve block have a power beyond port? There is one plugged hole very close to the pressure inlet, but PB should be on the other side of the block.. after all the integrated spools. I cant see any plugged ports there, maybe on the underside.. Has anyone put more hydraulics on Linde before, and where to connect it?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.