Report this forum post

This is probably a basic question but I am going to ask it. Contactor 1A has 27 volts on both legs of the contactor but is not pulling the 24v coil shut to allow power to the right drive motor? What am I missing? if it has voltage on both sided of the coil for the contactor shouldn't it be closing? is it a bad coil or is it looking for a signal to close from else were? In my head if the coil is energized on both sides it should close unless it has failed?
  • Posted 23 Jan 2025 00:03
  • By Chase_Jennings
  • joined 1 Nov'24 - 28 messages
  • Utah, United States
Chase

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field

PREMIUM business

VETTER Forks, Inc.
The world's most comprehensive product range as well as the most intelligent sensor fork for more safety and efficiency.
Latest job alerts …
Cleveland Ohio, United States
Wentzville, MO, United States
Columbia, SC, United States
Movers & Shakers
Laura Ness Owens Laura Ness Owens
Chief marketing officer, Bobcat Company
Chief commercial officer, Teradyne Robotics
CEO, MHEDA
President, European Rental Association (ERA)
Latest job alerts …
Columbia, SC, United States
Wentzville, MO, United States
Cleveland Ohio, United States