hello Matthew, we're working on a Skyjack 3226 serial # 27000255 that had several issues ( no lift, no travel, no steer, etc.. ). we the help of the service manual have replaced some relays a valve solenoid and a small harness. we now can get the unit to lift. however, in order for travel ( fwd/rev ) to work we manually have to close the hydraulic contactor. we are testing if the steering works that way as well. so the issue is the hyd pump contactor does not activate normally as it should. we are working with electrical schematics that are not identical to what the unit has ( wire colors, numbers, etc... ). we think a wire(s) or connector is not in the right place. any ideas on why the contactor would close for lift operation but not for travel?