Report this forum post

If I jump the contactor it works fine. The contactor has 19.76 volts going to the terminals. When I use a 24v PS The contactor works fine. There is a block labled NO. 102108 that is on the contactor. It is wired to 1 side of the contactor and the other 2 wires come off the panel. Maybe it is wired wrong? IS that block a resister or something?
  • Posted 20 Aug 2024 02:50
  • By specequip
  • joined 16 Aug'12 - 53 messages
  • Michigan, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Unicarriers FD80-2
Yokohama, Japan
Used - Sale
UN Forklift FBR25NQC3
HANGZHOU, Zhejiang, China
New - Sale
Upcoming industry events …
September 4, 2025 - Melbourne, Australia
September 17-18, 2025 - Miami, FL, United States
October 21-23, 2025 - Barcelona, Spain
Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.