Hello,

I'm having the same problem with the BT C3E150 forklift. It's similar to Cesab.

customer has pressed buttons and entered calibration. This caused the steering potentiometer to become defective.
Replace the steering potentiometer, turn it 5 times to the right against the stop and then 5 times counterclockwise to get to the middle. I then have 2.5 Kohm. The steering wheel can also be rotated 360 degrees, so when do I know how it is properly positioned clockwise and counterclockwise with calibration? This means I cannot pass the calibration.

Could you send me the manual te set up calibration in dashboard?

info @ gevo-machinery dot com

Thank you!