working on deploying front and rear blue safety spotlights across our fleet of 90 8FGCU32 (-30's, -25's) Rear spot 12v feed can be pulled from the reverse warning alarm (some of the newer lifts have a socket in the upper rear harness already set aside for the blue spot. 12v feed for the front blue spot is a greater challenge. Anyone have experience retrofitting? Pulling a feed from the directional switch on the column, perhaps? Pulling a feed from the F/R relays in the relay box under the left sponson below the fuse box has proved to be involved... Anyone with insights or ideas or practical experience greatly appreciated.
Thank you in advance!
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.