I was unable to look at analyzer 2.2.x - the menu skipped from 2.1 to 2.3.
2.3.8 has pot1 = 0.25v
Looking at calibration menu 3.1 I did see c1 accel pedal. Scrolling to that brought up message - "Close seat switch".
The only 2 options showing in calibration menu is c1 accel pedal and c2 battery
It does seem the seat switch is not functioning correctly. I checked the ground attaching out of the seat to the rails because it looked corroded but had no effect.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.