Report this forum post

I have a 5FGC20 Toyota fork lift that has a cranking/ starting issue.

I replaced the starting battery with a new AC Delco 685CCA Battery.
When I turn the key to the ON position the 2 red rectangular lights light up on the dash panel.

The lights stay on and when I turn the key to the CRANK position to crank the engine nothing happens.

When I connect a booster / starter charger to the battery and turn the key to the ON position the lights come on then turn off and when I cycle the key to the CRANK position the engine starts and stays running with or without the battery charger connected until I cycle the key to the OFF position.

To restart I have to follow the same process as above.

Any idea as to what the problem maybe ?

Thanks Pete S
  • Posted 7 Jun 2023 05:46
  • By Pete_Spencer
  • joined 7 Jun'23 - 1 message
  • Wisconsin, United States
P Spencer

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Jan Zuurbier Jan Zuurbier
Global CEO, Swisslog
Board member, UKMHA
Strategic advisor, Roboteon
CEO Americas, Hai Robotics
Global Industry News
edition #1244 - 21 August 2025
In our feel good story for the week, we report on a donation from Wisconsin-headquartered Big Forklifts to the University of Wisconsin-Madison’s College of Engineering, after discovering the institution was still using one of its 1960s walkie stackers... Continue reading
Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.
Fact of the week
Portugal was the first country to implement a nationwide, automatic electronic toll collection system. This system allows vehicles to pass through toll booths without stopping, significantly improving traffic flow on highways.