Report this forum post

Roc,

With the front cover and crank pulley removed, you line up the keyway straight down in the 6 oclock position. You should see a timing mark in the old pump housing. The cam shaft pulley pin should be vertical and align with the mark in the rear belt cover. Once tension is set, rotate the engine over twice by hand and verify marks still line up. Good Luck
  • Posted 31 Dec 2021 07:54
  • By Fishmech
  • joined 12 Jul'17 - 370 messages
  • Virginia, United States
The hard to do we do right away. The impossible just takes a little longer.

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Latest job alerts …
Tampa, United States
Marietta, United States
Tampa/Orlando Florida, United States
Dallas, TX or Lexington, KY, United States
Movers & Shakers
Steve Dimitrovski Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia
Global CEO, Swisslog
Board member, UKMHA

PREMIUM business

MAXAM Tire, Inc.
Simplify your productivity with MAXAM's range of performance material handling tires, designed with the latest EcoPoint3 technology.
Global Industry News
edition #1245 - 28 August 2025
In this week’s Forkliftaction News , we look at MHEDA’s Q3 Economic Advisory Report which reveals current resilience in the US materials handling sector... Continue reading