Hi swoop223

I have looking into everything that has been discussed and the documents that you have sent me. After all that I'm still dealing with a high idle.

I have possibly located the issue, but I wanted to see what you though as you seemed very knowledgably. I know that the FCVS is supposed to click as it cycles on and off. I have noticed that I also have a clicking noise coming from the throttle body. I had removed the side cover and when the key is on the motor/coil on the side of the throttle body keeps opening the butterfly in the throttle body. With the key 'On' it will keep opening full throttle then it goes down to about 70% throttle, goes back to 100% back to 70%. It will just keep cycling as long as the key is on. Then once I start it it goes full throttle and then will just fluxuate slightly at a high idle.

I figure I may have a bad throttle body or maybe the computer is bad and sending a signal to the throttle body to open when it not supposed to?

What do you think?