I have changed out every component on the assembly all the way through with no change. Is the heatsink the plate it is sitting on? Would that cause any issues like this?
What i have changed out from the assembly is as follows.....
The card
5 Rec
All of the snubber filters
2 Rec
Reactor/Choke is what its called in the book, it is the big block in the bottom right connecting wires with the 5 and 2 rec.
Motor current sensor
3 Rec diode
1 Rec
Capacitor
Thermal protector

All of these parts are either brand new from Crown or they were pulled from a forklift that is working to throw parts at it.