hi Guys. Greetings from this side.
I have a hyster H5.0ft diesel forklift with serial number (P005B03724J).
this forklift was faulty with the electric nozzles not supplying gas to the engine and we changed it. also, changed the rotary pump , crankshaft sensor and the RPM sensor too. this forklift started working fine but for just a week.
it stopped and started showing few error codes.....2000-12, 97-3..........its a H5.0FT hyster diesel forklift and it was recently changed of its electric injector nozzles and this truck worked for 7 days and stopped. right now this forklift is not starting there is no current going to the electric nozzles anymore. checked for voltage but none, even the heater plug has no current. it just cranks on and on and runs down the battery.
pls i'd like assistance to this issue as i've concluded that it might be ECU that is faulty. your help will be highly appreciated.... here are my emails if you might want to send on there.
thanks in advance...
[email address removed]/ [email address removed]