Hello ,
The problem is with aLinde E 16C , 335- 02 series.The hidraulic functions is not working , the steering not working.
On the truck doctor at window (2) of lifting diagnose -( instant errors )it show me "19" error that say joystick must be teach- in.( i tryed to calibrate the lift / tilt joystick and stored the "ok" values , but in that window the " 19" error still apear..
At window( 3 )(fault code stored) in truck doctor , after i erase all errors , when i activate the lift / tilt joystick , apear error "29".The drive is working , the baterry is 50% charged , seat switch ok , cabin switch ok , hidraulic motor conexions ok , brush ok.
What cause can be ? It may be the power module ?
Thanks ,
Regards ,
Gabi
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.