Guys, Im struggling, I work on Tractors but do mostly all t/s. but this lift is killing me. its a 2017 but the diagram I have is not accurate. with all the safety switches disconnected it still cranks(tank lock, pressure, seat belt or seat sw) I compared all circuits to a sister, but it seems like the VCM is just allowing this to happen. the VCM and ECM were both swapped to check. Im thinking about calling the harness but I cant be definitive as to where the harness (may) be shorted. and tips would help, I think maybe the VCM has some input that is incorrect, maybe. thanks forklift guys....