Gents , I have this 25RCTF-s,,, When I would try to move Fwd or Rvs no clicking or movement of truck.... chked all switches under floor boards all good.... So I removed the plate behind mast to chk brake switches... I noticed that the insulation for both wires were peeled back then taped up. figured these were to brake switch ,, So I pulled tape off and jumped the 2 wires and now the truck clicks and wants to move but seam like brake or a locking mechanism is preventing it from moving? The brake rotors spin freely so it doesn't seem like that's stopping it ? is there another wheel locking device that is still engaged that is not releasing ?
Any help would be greatly appreciated , thanking you in advance..