hello nero ,
I have ERROR CODE 245 on hyster J1.60XMT 48VDC With ZAPI DUAL AC2&HP on dash display"MASTER NO RECEIVING MESSAGE ", i check at A7 and A22 PIN of DASH DSIPLAY (removing the plug at dash display) The VALUE IS KOHM
I PUT AGAIN THE PLUG TO THE DASH DISPLAY, imeasure with multimeter there is a value of 124 ohm. I check all wiring of CAN H CANL continuité is ok(between 120ohm resistance,Zapi controller,PCsocket). IT CAN BE DASH DISPALY PROBLEME?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.