Hi All,
I just put a new alternator, exact parts match, into our 2011 s40ft. forklift. This has a Mazda LP engine, and we verified that the battery is good.
When we tested everything, the battery tested fine, but the charging circuit is only feeding 3 A through the negative battery cable.
We don't know exactly where to start troubleshooting, and any tips were much appreciated. Is there some kind a fusible link, or is there a fuse that could be causing the issue? Again, thanks in advance for all your help.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.