Hi, i have a truck w/ no spark at plug, neg side of coil not "breaking fire", nor do i have signal at the tach line. I have swapped out dist and igniter to no avail. According to schematic on connector "C" term 30 violet (NE -) to dist. 31 pink (NE +) to dist. 32 grn/blk (IGF) power from igniter. 33 red/blk (IGT/IG1)-this should control (neg) to dist (neg coil side), if i am right. Does anyone think i have bad ECS? P.S. My wires dont match that of schematic. Any help would be greatly appreciated.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.