Ok,

*No display at all, no lights come on on the icon strip.

*I replaced the Key switch and verified batt. volts when on

*I unplugged the 4 connectors to verify the pins didn't slip out, All plugs are plunged in.

* off seat/key off off seat/key on on seat/on key on seat/off key
TB1=29 1.01v 3.48v 3.48v.98v
TB4=10 4.12v 35.41v 35.4v 6.26v
TB2=15 189 mv 357mv 350mv 234mv
TB5=6 1.45v 1.29v 5.28v 1.34v
TB3=7/13 5.2v 5.4v 35.25v 6.2v
TB6=8.71v.48v 1.16v.392v

*As far as ohms:
between batt connector on forklift and frame
+ 7.35 mohms
- 6.94 mohms

between batt connector attached to battery and frame:
+ open
-1.35 mohms

*The controller has a "EV100" sticker on it.

Thank you for your input,

Tim