1. Home
  2. Forums
  3. Report post

Report this forum post

Hello,
I have a T40C/ SN 38Y04003. Sometimes when I am using it it acts as though I am driving with the brakes on. It will then start driving fine in reverse, but when I shift to neutral it is still in reverse. My thoughts are that somehow the reverse solenoid is hanging and when I go into forward it is still somehow hung in reverse too so I am trying to drive forward while it is trying to go backward. Is this possible?
  • Posted 31 Jul 2017 02:50
  • By CatT40C
  • joined 31 Jul'17 - 1 message
  • North Carolina, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Machinery-onQ
Machinery-onQ.com is the one place to source and sell all your new and used machinery.
Find equipment for sale | Add a listing
VISIT
machinery-onQ.com
Machinery-onQ

Showcased in the Virtual Expo

Movers & Shakers
Rob Ott Rob Ott
Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
Phil Roe
President, Logistics UK
Paul Fiala
Director of dealer development East Coast, Big Joe Forklifts
Jeannette Walker
Vice president, customer, TVH Americas
Terberg RT223
Terberg RT223 2012
Balling, Denmark
Used - Sale
Taylor TX175
Taylor TX175
Coraopolis, Pennsylvania, United States
New - Sale & Hire
|

Showcased in the Virtual Expo

From the forum discussions …
"Komatsu FG30HT-16 - Thanks for the help Walker-Wilson from France: The ECM will not power the fuel solenoid/injector unless it sees a crank signa...bad crank sensor = no start. Verify you have..."
Walker_Wilson, France
Read & Post in our Forums
Fact of the week
Funerals in Spain typically occur within 24 to 48 hours of death, whereas in other European countries they wait one or more weeks. This rapid timeframe is a cultural norm grown from the past need to manage the warm climate without modern embalming.