Hey guys,
I have a Raymond 102XM that is flashing this error code E118, but I cant find any info on this error code. Walkie wont do a thing completely dead in the water. Battery seems good, cant see any obvious problems. Has anyone ran into this error code?
Scott
Showing items 1 - 5 of 5 results.
just an FYI on this E118. I had one today and I tested the batteries with a load tester 3 of 4 tested on the edge of weak. Then I did pairs and got the same result. I was going to plug in to the truck and see if there was any difference in the voltage drop and when I plugged in the batteries the truck powered up. I am planning on replacing the batteries.
no, thank you for posting the solution!
This is going to sound a bit silly but the problem was low battery. The operator told me the battery was fully charged and I believed him. In the past the first thing I would do with any error this machine would through at me was charge the battery, and 9 times out of 10 low batteries was the problem. But thanks for your inputs, its nice to know there are people out there who can give advice when in a pickle.
Scott
Looks like this truck has a BT Rolatruc tiller head on it & is also a clone of a Toyota truck.
this is part of the RPIN that has a bunch of new codes!
tell me more about your problem so i can help. also toy PJ have similar codes.
have you searched them?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.