1. Home
2. Forums
3. Technical Troubleshooting
4. OM Pimespo
5. XE15 3AC

OM Pimespo XE15 3AC:
OM CARRELLI XE15 3AC WON'T MOVE

Dear,

We have in our factory one OM CARRELLI forklift

Model: XE15 3AC

Serie Number: F14032W00532
Year of manufacture 2008.

Alarm: 182
When the ignition is switched on, the pump starts and immediately the message ALARM 182 appears.

The ascent and descent of the mast is not a problem.

But the forklift does not move forward or backward either.

Ca n someone explan us the problem and help us to resolve the problem.

Best regards.

• Posted 22 Jan 2018 20:44
• Discussion started by BAM3903
• 14 PROVINCE DE nOUADHIBOU, Mauritania

work, work and work again

Post a ReplyReport this post

Hello
We have also one OM Carrelli XE15
We have 252 fault code ( TO ACTIVATE HYDRAULICS) , any ideea what we have to fix/repair?

Thank you

• Posted 29 Aug 2018 15:38
• Reply by Alex1978
• Romania

Post a Reply Report this post

CODE:
ALARM 182

ALARM:
MOT. TH SENS. LEFT. KO

PROBABLE CAUSES:
The temperature sensor of the left motor is faulty.

CORRECTIVE ACTION:
Chceck that the PTC sensor is not short circuited and that the is a resistanse of about 600 Ohms at its ends. Check the wiring.

• Posted 3 May 2018 18:12
• Reply by tomason2
• -, Poland

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.