My company has an older yale clamp truck that won't move it is a model# ERC050ZFN36SE084 I can't find any information about this model and it won't move and is giving an error code 42.
Showing items 1 - 5 of 5 results.
-93 is a steer motor brush wear fault. -142 is open shunt sensor on the pump controller. This is the same fault you had on the traction controller.
ok now it moves but the hydraulics don't work and while moving it has an error code -93 and when you try to use the hydraulics it gives a code of -142
it has an ev-100 control but the error is exactly -42 so I will have to find an electrical diagram the last technician to come out took all the books with him.
Check the green wire that connects to PZ4 plug from the SCR1 current sensor. -42 fault is open sensor.
Hello.
That is a electric forklift correct?
Look at the control model that probably is a ZAPI model and make a search in the web for that ZAPI model.
You can also send me a picture of the model and i try to see something.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.