Im having issues with my reach truck where it wont go forward or reverse at the moment. I can hear the contactor assembly clicking rather fast when I direct the joystick in either direction, sometimes it might engage forward or reverse but only for a moment. I did happen to catch an error code early on but I haven't seen them since. (24 and 06)
The forklift battery has a significant amount of charge, however the batteries are not in the best condition and dont hold charge for long. I did try the forklift after a charge and it still made the clicking sound.
Any help would be great. Ben
Showing items 1 - 3 of 3 results.
Thanks for getting back to me, Have a Great Day!
Awesome! The switch under the brake pedal was sporting a faulty wire. It looks like it was pinched at some point so I replaced it and it works just fine now.
Thanks for your reply.
Ok, I few things I would look at first. Because you say it's the same problem in both directions I would look at the switch under the brake pedal and drive motor brake switches. Also check your battery under a load, I would connect my meter to the battery cables and hit lift to see how much the battery voltage drops.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.