I need help komotsuFB16M-3E, error 39 and 83.
Jungheinrich is the model MP1514F controllers. I would be grateful if I jump offer service book.
Showing items 1 - 3 of 3 results.
I have this forklift working now but it still has 120 ohms on the canbus line. There is a terminating resistor on the armrest, which I can "see" from all points. There is another on the display, but it's connected to another can_lo signal and cannot be "seen". The wiring diagram shows it that way and it is working like that. I'd love to hear an explanation.
hi you both need need to check the can bus line , you should have 60 ohms on the can bus line
I got error 39 when I was testing the display by itself on the workbench with only the 12v power connected. When it went back in the forklift that error ceased. My conclusion is it was looking for the other devices on the canbus. EFG 535
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.