Seat and cabin switch are OK, so if I understand it's supposed it have traction without the hydraulic controller or the display not receive information from it and cut traction too?
hydraulic and traction controller, control only separate seat switch and kabinne switch seating unit between and display
I have updates, problem solved of the wiring of temperature sensor. Now I have the display working normally but have no traction and no hydraulics. I have dismounted the controller of hydraulic and it has a loose resistor, i soldered it to the board again and when I turn the machine on the board burns. The board works with 80v from the converter down it, i'm afraid mount a new controller and burn it too.
I think the machine without the OK signal of hydraulic controller don't have traction, am I right?
yes, that's true I have 80V on plug of brushes and temperature sensor of the hidraulic motor. I've burned two displays and now the hidraulic motor need to be dismounted.
Thanks for help.
cumps.
one of your engines have 80 volts at the wiring of temperature or carbon brush guard, and that's why you burned display
greetings michel
I tried another display, and it's OK but i have all plugs of sensor's and brushes off. I turn all on and it came to the same, now the only thing what appear on display is the danger light! I turn all plugs off again and it not comes better, no information on display and no function again...
I plug off all the fans and take the battery out of and the voltage on chassis get down for 4Volts with the plug of baterry on. But the machine have the same simptoms. I check all 3 motors and they are ok, no short circuit to the frame, converter 80/24 is OK but when I turn key on all lights of display turns on and don't make any function, no displays battery and hours. Any more suggestion??
He means the Fan on the motors (cooling Fan)
Look after you batterij, take them out of truck and make the measerment again.
John.
i don't understand what you mean with "fins loose"...
by the way, at the moment i have a big voltage in the frame and i'm trying to find where it came.
First make all your fins loose
tel my what is you problem
Hi LACI my e-mail is filipebarrosoferreira88(at)gmail(dot)com
Thanks.
Hy Filipe.
your email adress???