Showing items 1 - 8 of 8 results.
i'm actually facing an ERROR 055 & 014 on a JUNG EFG425.when puching accelerator the errors appear on display. And main contactor stop closing.
Can anyone help to find out about the fault or at least tell me what code 055 & 014 reffers to?
2011 year.
Thank's.
e-mail is paul @ mcgannonforklifts.com
Many thanks for all your help!
e-mail is [email address removed]
Many thanks for all your help!
e-mail is [email address removed]
Many thanks for all your help!
One reply would have done..
Whats your e-mail?
Apparently the controller is missing the signal, switch might be ok, wiring might be okay, but does the controller get the signal? Maybe a faulty connector?
Controller "sees" a faulty or missing signal from its safety circuit (seatswithc, footpedal-as with the reachtruckmodels- and other safety switches that gives a signal to the controller in order for the controller to "see"that its safe to give an output to drive and/or lift motors.
Fault 68 is described as" safety switch wire breakage" almost in every Jungheinrich model
A quick check would be to make a connection on the controller, bridging the 2 wires from all safety switches..
Thank you for the reply, i assume the deadman is the micro on the battery deadman? Also which footpedal? The deadman micro is also working ok and i am currently checking continuity on the circuit.
68 indicates broken cable in safety circuit, either seat switch or deadman switch.
Check deadman switch, footpedal...
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.