1. Home
2. Forums
3. Technical Troubleshooting
4. Raymond
5. 740R45TT

Raymond 740R45TT:
intermitten code 8c 8d

Typical, code is active for operator but never shows when im here. Code 8c & 8D......Anyone know these codes so i can zero in on the issue. My coworker took off with the manual but i think 8d had to do with deadman?

• Posted 12 Nov 2016 01:03
• Modified 12 Nov 2016 01:05 by poster
• Discussion started by jonniClamCakes
• Massachusetts, United States

Post a ReplyReport this post

Deadman pedal is going down to far before the switch is activating with the deadman sensor seeing the pedal move. Have had good luck adjusting the deadman pedal switch. CHEERS MATE

• Posted 18 Feb 2017 05:37
• Modified 18 Feb 2017 05:38 by poster
• Reply by tyler_d
• California, United States

Post a Reply Report this post

8C:
Dead man switch bad or stuck, out of position.
play in brake pedal bushing or a weak return switch cause this code.

• Posted 14 Dec 2016 13:58
• Reply by EasiTek
• Ontario, Canada

Post a Reply Report this post

Code 8C - Deadman Pedal Signals Do Not Agree
Voltages at the VM from the Deadman Switch and the Deadman Sensor indicate one is activated and the other is not.

• Posted 26 Nov 2016 04:39
• Reply by CarlosCol
• Bogota, Colombia

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.