Discussion:
Hard Starting when Cold

Operators reported difficult starting first thing in the morning. Takes awhile then when it starts it runs OK during the day. Idle surges a little. Mazda FE engine
  • Posted 8 Mar 2024 12:31
  • By William_Kaono
  • joined 8 Mar'24 - 3 messages
  • Hawaii, United States
Showing items 1 - 2 of 2 results.
Thanks. I'll give it look.
  • Posted 9 Mar 2024 12:40
  • By William_Kaono
  • joined 8 Mar'24 - 3 messages
  • Hawaii, United States
This truck on the later trucks were getting into emissions the lpg system had a Asian lpg converter after a while the converter would gum up and when cold would stall or hard to start you probably need to replace it or rebuild it.as for the surge there is a step up value on the side of the carb that steps up the idel when you lift a load or turn the steering wheel to help so the motor does not stall out might need to adjust it hope l was of help.
  • Posted 9 Mar 2024 12:36
  • By Scott_
  • joined 16 May'21 - 313 messages
  • Pennsylvania, United States
Scott

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

SMV (Konecranes) 4538CCX4
Balling, Denmark
Used - Sale
Terberg RT223
Balling, Denmark
Used - Sale

PREMIUM business

GemOne
Telematics for industrial fleets. Fleet & safety management solutions: track vehicles, boost efficiency, operate safer, & avoid unexpected downtime.
Upcoming in the editorial calendar
MANAGING MIXED FLEETS
Oct 2025
ASSET FINANCE
Nov 2025