G30E-3 serial CX-04308
I am a new owner of this unit and it came with brakes that grab and groan even when the pedal is pressed lightly. I know they're a wet multi-plate setup but it seems like they're responding as if they're dry. Do they run in the diff oil? Or do they have their own reservoir? thanks
Showing items 1 - 5 of 5 results.
Drain and clean out the oil in the brake system and replace with low foaming universal tractor transmission fluid. Run for a few hours and change it again with universal tractor transmission fluid. It will be fine after that
Thanks Tom, ended up using TGH fluid. I think the old fluid just hadn't been changed in a long time, it had lost its lubricity and that's why the brakes were grabbing.
Doosan recommends a trans/gear lube for wet brake applications.
Thanks Helga I'll give it a try
Hi There, We had a problem the same a Doosan Forklift, We changed the Diff Oil at the front, and by memory it was Automatic oil, Dextron used. I would recommend change the Oil with the correct fluid.
Helga
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.