Discussion:
fuel delivery problems

hey guys,

So I've got a GLC050VX that very intermittently wouldn't start so I swapped the LP regulator with another and didn't have a problem with it after that. I then rebuilt the one I pulled with an IMPCO RK-EPR-3 repair kit per the online instructions provided by IMPCO. Now I've got the regulator installed in the lift and it will not start. While cranking it sounds like its not getting fuel into the mix. Any thoughts?
  • Posted 8 Sep 2017 05:23
  • By cheez890
  • joined 28 Jul'17 - 13 messages
  • Arizona, United States
Showing items 1 - 1 of 1 results.
If this is the long regulator the rear section is the electronic controller. It could have a problem inboard.
  • Posted 8 Sep 2017 07:11
  • By BREWSKI
  • joined 10 Jan'12 - 1,699 messages
  • Nebraska, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Latest job alerts …
Danville, IL, United States
Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.

Showcased in the Virtual Expo

Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.