HI
CAN ANYONE HELP WITH THIS FAULT CODE 522761-6, THIS MACHINE HAS THIS CODE AND ALSO THE HYDRAULICS ARE NOT WORKING CORRECTLY , THE HYDRAULICS WHEN USUING THE LEVERS (MINI) THE TILT AND LIFT AND LOWER CANNOT BE CONTROLLED , ANYBODY ANY IDEAS?
REGARDS PETER
Showing items 1 - 3 of 3 results.
Hello There, need HELP URGENTLY. We have 2 x HYSTER H3.0FT units in our fleet having a fault code displayed on the dash board 523777-12 on both the units bearing sr nos: P177B09280T & P177B09269T
Can anyone help and guide what these fault codes relate, earliest possible support will be highly appreciated. Thanks
brewski,
thanks for info , we checked all the wiring so its probably the logic
regards peter
A. IGN 1 OR IGN 3 VOLTAGE OUTPUT OPEN SUPPLY
B. IGN 2 VOLTAGE OUTPUT SHORTED TO GROUND
C. IGN 1 OR IGN 3 OUTPUT SHORTED TO GROUND
D. FUNCTIONAL FAILURE IN CONTROLLER
These are the possible causes. Check the wiring at the base of the arm rest and under the seat. You may have a pinched wire harness.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.