Truck no drive or lift
checked motors etc - nothing obvious
Error 19 info 6 on dash
any ideas, please
Showing items 1 - 4 of 4 results.
Hi all. We are getting error 107 and 019 after charging the battery. Cannot find and info on 107
Regards, Jonathan
Hi.
Error 19 is 99% a faulty controller. Info 6 is deadman switch / seat switch not activated. Do you have any other text in display coming up with error 19?
Best regards, Max
hi,
I think you are faulty one of the control units. If you do not have diagnostic equipment, you can do this with a multimeter. Check the diodes on all three control units. From the positive terminal to each of the phases and vice versa. There should be a resistance of approximately 0.465
The motor encoder is usually closed on the bearing
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.