Dear
message is displayed please be seated
its new model EP20TBCB SN 267E00037
model year 2018
message displayed please be seated, i checked the seat switch its ok and i checked the IP its 48 V
when i take out the battery and i fitted again its work for few second then again same problem happened
anyone can help on that error
Showing items 1 - 6 of 6 results.
Wires are OK
As when I measured the current was 48 v
If harness pb should not give 48v
I checked the seat switch on another forklift and was working
I have doubt. Could be the return wire to the dashboard or the controller itself
when you say you "checked" the switch, where did you do that? go as close to controller as possible and jumper the wires. Most issues are the harness itself, where it folds under seat
I have doubt it's the board itself
There is no loose connection I checked all
it is possible it have a switch with two switching connections same time. a break and a make contact same time. One of this lose?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.