1. Home
2. Forums
3. Technical Troubleshooting
4. Still
5. EGV-14

Still EGV-14:
EGV-14 error codes (AL-03 & AL-06)

Hi, Dejavu , I have a problem with EGV-10
error Al 05 , would please help me.

• Posted 8 Dec 2022 01:10
• Reply by EgyptWoods
• Romania

Welcome any time

Post a Reply Report this post

Hello Mr. StillCAT please visit also the "Technical arena" section.

• Posted 11 Aug 2014 06:35
• Reply by Dejavu
• Bucuresti, Romania

It may look like I'm doing nothing, but in my head I'm quite busy.

Post a Reply Report this post

Thanks for your answer, with your tip to find out it was a fuse.

• Posted 4 Feb 2014 07:29
• Reply by fabritchio
• AFRANIO - PE, Brazil

fabricio

Post a Reply Report this post

Thanks for your answer, with your tip to find out it was a fuse.

• Posted 4 Feb 2014 07:28
• Modified 4 Feb 2014 07:28 by poster
• Reply by fabritchio
• AFRANIO - PE, Brazil

fabricio

Post a Reply Report this post

Asumming that your machine type is 0244 to 0250,seems to me the combination of error codes indicate:wiring problems to traction motor,field winding of that motor defective,low battery capacity,main contactor defective (contacts or coil) or battery plug.Which error comes up at first?

• Posted 2 Feb 2014 01:37
• Reply by StillCAT
• Bucharest, Romania

Post a Reply Report this post

Hi,
I hope someone can help in finding out the real cause of the error codes : AL-32 and AL-58 ??
And I would really appreciate if full list of error codes can be shared :)

Looking for you help.. and thank in advance.

• Posted 2 Feb 2014 00:18
• Reply by fabritchio
• AFRANIO - PE, Brazil

fabricio

Post a Reply Report this post

Please provide full serial number of the machine in order to help you.

• Posted 9 Apr 2013 17:47
• Reply by StillCAT
• Bucharest, Romania

Post a Reply Report this post

Thanks for your reply.

• Posted 6 Jan 2009 11:53
• Reply by Quark555
• Dubai, United Arab Emirates

Post a Reply Report this post

al03-Fluctuating motor
voltage
F1 or F2 separated or
short between armature
and field winding
Check:
-condition of armature and field winding
cables
-motor insulation
-if the motor cables are secure
-else short-circuit in the controller;
replace controller

• Posted 6 Jan 2009 03:03
• Reply by niki_r
• sofia, Bulgaria

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.