Showing items 1 - 8 of 8 results.
Oh dear. Thanks for confirming my worst suspicions.
That is probably the indicator for service, you can only reset with Jungheinrich program and incado cable.
Hi all,
Finally got the machine into the workshop. One of the motor cables was cooked just as you good folk suggested.
Now we have a problem that the error log is full. Just shows a spanner and no numbers or anything. The machine is working fine.
Any suggestions ?
Regards, Jonathan
- Check motor connection wire (wire breakage);
- Replace motor;
If you are certain, the drive output is unburnt
And the battery is healthy
Control the motor
https://drive.google.com/file/d/1kerNgUTrHw1jycaM-hwo9c_AejevAgtx/view?usp=sharing
Here's a photo
Did you write the error code correctly
Thanks so much. Will look into it.
Looks like motorcables broken.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.