will have a look in depot for anything that might help , but check mast switch and lower ones about 1 meter high, can be magnet reed switches or lever arm switches, used to find if reed switches they were moved out of range or broken , thinks mast is still up, i think there are switches on the rotate to house it as well , have seen one with a sensor on top of the cab that picks up on racking and allows full speed
Hi there
Ive not been out to it yet, as most of my work is for the trade, i try talk the engineers through it before hand. if they cannot get it resolved then I have to make the trip out, this looks like one of those cases. I will mention this to them first, but failing that, it would be nice to have a wiring diagram if i need to go out to it.
Thanks for the advice, will check.
Regards
is it possible you have a bad sensor on the mast sections? i mean the truck have sensors on the mast. I have repair it by my customer they have the same problem. Everythink works slow. It is a highest level detection and for safe the truck works slow